|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CYBERGATETM CYG2100/CYG2110/CYG2120 DESCRIPTION Clare's CYG21XX Series DAA modules provide a complete telephone line interface circuit in a small 1.07" x 1.07" x 0.4" package. The modules provide a fast and cost effective solution for designs that require an interface to the telephone line. The CYG2100 is designed to meet PTT and safety regulations in 13 countries. The CYG2110 and CYG2120 are designed to meet PTT regulations in France and Spain, respectively. FEATURES s Low distortion transformer signal coupling s s s s s s s s APPLICATIONS s s s s s s s s s s s s s (0.01% max) Complete ring detector circuit Low power hookswitch Electronic inductor/gyrator circuit Surge protection V.32 bis /V.34 compatible PTT and safety regulations in 15 countries PC board mountable FCC Compatible Home medical devices Plant monitoring equipment Security/alarm systems Utility meters Modems Voicemail systems Vending machines Elevator control boxes Network routers PBX Systems PC mother boards Telephony applications Digital telephone answering machines APPROVALS s UL recognized file #: E174201 s BSI certified: RATINGS (@ 25 C) Parameter Isolation Voltage Operational Temperature Storage Temperature Relative Humidity (Non-Condensing) Soldering Temperature Tip/Ring Load Current (continuous) Hookswitch LED Drive Current Hookswitch LED Reverse Voltage Ring Detect Phototransistor Voltage VCC Min 0 0 10 Typ Max 1500 70 100 85 260 120 50 5 20 Units VRMS C BS EN 60950: 1992 Certificate # 8123 s BABT recognized; listing pending s C % C mA mA V V Note: For Mechanical Dimensions See Pages 408-415 North America: 1-800-272-5273 Europe: 32-11-300868 Asia: 886-2-2523-6368 Japan: 03-3980-2212 356 CYBERGATETM CYG2100/CYG2110/CYG2120 SPECIFICATIONS PARAMETER DC Electrical Characteristics On-Hook Impedance Off-Hook Line Leakage Current Hookswitch Resistance Off-Hook Relay Supply Current Hookswitch Power Source DC Loop Current Mute Relay Supply Current AC Signal Path Electrical Characteristics Return Loss Insertion Loss Transmit Receive Frequency Response Longitudinal Balance On-Hook Off-Hook Total Harmonic Distortion Secondary Load Impedance Primary Source Impedance Ring Detection Circuit Characteristics Ringing Voltage Detection Range CYG2100, CYG2110 CYG2120 Ringing Frequency Detection Range Ringer Impedance RING Output Voltage (Pulsed) Logic `0', Ring present Logic `1', Ring not present Surge, Transient, and solation Characteristics Surge Protection Voltage Tip and Ring Isolation Voltage (Pins 1-7 to 10-11) 60 Seconds 300 1500 V VRMS 20-150-VRMS 29 28 15 18 150 150 70 0.8 VCC VRMS VRMS Hz K V V 300-3500Hz Test Circuit 1 Test Circuit 2 300-3500Hz @350Hz and -10dBm Line 1 and Line 2 Tip and Ring 14 -0.25 60 40 25 100 600 7 7 +0.25 0.01 dB dB dB dB dB dB % @100VDC across pins 5,6 (R,T) @100VDC across pins 5,6 (R,T) @ VCC=5V @ VCC=5V 10 7 4.75 5 7 8 5.0 8 10 35 9 20 120 9 M A mA V mA mA CONDITIONS MIN TYP MAX UNITS 50-70Hz 25Hz VCC @+5V Note: For Mechanical Dimensions See Pages 408-415 www.clare.com 357 CYBERGATETM CYG2100/CYG2110/CYG2120 TEST CIRCUITS 1. CYG21XX Transmit Insertion Loss 2. CYG21XX Receive Insertion Loss VT Rm 294 LINE1 LINE2 RING GND OH MUTE VCC +5V RING +VBATT ILOOP 10H VR Rm 294 TIP VLT 600 LINE1 LINE2 RING GND OH MUTE VCC +VBATT ILOOP 10H TIP VLR RING 600 +5V AC Source Transmit Insertion Loss = GTR = 20 Log VLT VT 10H Receive Insertion Loss = G RC = 20 Log -VBATT VR V LR 10H -VBATT PACKAGE PINOUTS CYG21XX LINE 1 LINE 2 RING GND OH MUTE VCC CYG21XX Pinouts & Definitions PIN# I/O Name LINE1 LINE2 RING Function Transformer isolated audio signal coupling path for the telephone line. Transformer isolated audio signal coupling path for the telephone line. Active LOW indicates an incoming ring signal. This is pulsed LOW by the AC ring signal at the ring frequency from 15-40Hz. Connected to host system ground. Driving this pin LOW asserts the off-hook condition. The hookswitch LED is current limited by an internal 470 resistor. Driving this pin LOW activates the mute relay for pulse dialing. The mute control is activated on or slightly before (tpms max.) the start of the first dial pulse, then kept active until the end (50ms max.) of the last dial pulse. The mute relay LED is current limited by an internal 470 resistor. Provides power to the hookswitch LED. Typically +5V for 8mA LED current. LED is current limited by an internal 470 resistor. VCC should not exceed 20V. Connection to telephone line Ring conductor. Connection to telephone line Tip conductor. 1 2 11 10 TIP RING 1 2 3 4 5 6 7 I/O I/O O 3 Top View 4 5 I I GND OH 6 I MUTE 7 I VCC 11 10 I/O I/O RING TIP Note: For Mechanical Dimensions See Pages 408-415 North America: 1-800-272-5273 Europe: 32-11-300868 Asia: 886-2-2523-6368 Japan: 03-3980-2212 358 CYBERGATETM CYG2100/CYG2110/CYG2120 TYPICAL APPLICATION MUTE 7 LINE 1 4.3V 4.3V LINE 2 1 GYRATOR SURGE PROTECTOR 6 VCC TX1 * 100 ** C VCC 10 RING HYBRID CIRCUIT TX2 2 HOOKSWITCH VCC RING DETECT NETWORK TO TELEPHONE LINE RX OH RELAY GND RING OH RING 5 3 470 56k VCC 11 4 GND TIP * UK/Sweden = 350 All other countries = 100 ** Installed for German/Swiss DAA Module Note: For Mechanical Dimensions See Pages 408-415 www.clare.com 359 |
Price & Availability of CYG2120 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |